Stone benchtop installed on fresh cabinetry showing a 20mm reveal and waterfall edge

Get matched with a renovator

Benchtop Installation in Melbourne

Supply and install of porcelain, sintered stone, natural granite, timber and low-silica benchtops. All current selections comply with the engineered-stone ban.

Try the Cost Calculator

Who this benchtop installation service is for

Homeowners with sound cabinetry but a tired or non-compliant benchtop use this service when the goal is fresh stone above the existing carcasses: porcelain, sintered stone, granite, marble, timber or low-silica alternatives.

Tell us the rough cabinetry-run length, the material you want (porcelain, sintered, granite, marble, timber or low-silica) and your suburb. We aim to respond the same day where possible with a stone fabricator and installer from our network.

Benchtop fabrication, install and splashback finishing scope

Standalone benchtop installation through our network covers the items below as part of the fixed-price scope. The matched fabricator confirms slab selection, edge profile and template tolerances in writing.

Material selection

Porcelain, sintered stone, granite, marble, solid timber, laminate or low-silica engineered stone under 1% crystalline silica.

Template and fabrication

Digital or laser template of the cabinet run, then slab fabrication off-site at the supplier's workshop.

Installation

Levelled and silicone-bedded onto the cabinetry, with mitred returns and shaped overhangs as designed.

Edge profile

A 20mm reveal, a mitred 40 to 80mm waterfall, or an eased or pencil edge depending on the brief.

Cut-outs

Sink, cooktop, tapware and powerpoint cut-outs templated and finished to the manufacturer tolerances.

Sealing and care brief

Natural stone sealed on install with a care brief; porcelain and sintered stone delivered ready to use.

How the matched-renovator process works for benchtop installation

Four steps from first contact to a slab on the cabinetry. Standalone benchtop work runs faster than a full reno because the template and fabrication are the only off-site phase.

01

Enquire

Submit the form with rough cabinetry-run dimensions, your preferred material and suburb. We aim to respond the same day where possible.
02

Match

Your enquiry is routed to a stone fabricator and installer whose recent work matches your slab choice and edge brief.
03

Template

The fabricator templates the cabinet run, confirms cut-outs and edge profile, and finalises material selection.
04

Install

Slabs are fabricated off-site over two to three weeks, then installed with mitred returns, sealing and a care brief.

Why our benchtop installation and stone-fabrication network is right for Melbourne

Stone fabricators in our network

Installers routed for standalone benchtop work hold the registration appropriate for the scope and operate dust-suppressed, silica-safe workshops.

Engineered-stone-ban compliance

All current selections comply with the 1 July 2024 national rules on engineered stone. Low-silica and natural alternatives are cited on the quote.

Templated, fabricated, fitted in days

Benchtop-only briefs typically template, fabricate and install inside two to three weeks once the slab is selected. Sealing and a care brief are delivered on completion.

Benchtop installation is carried out by the independent fabricator and installer we connect you with. We are a referral and matching service, not the installer. The matched fabricator contracts with you direct under a written quote that confirms slab and edge profile. See the disclaimer for the full terms.

Common Benchtop Installation questions in Melbourne

What benchtop materials can I choose in 2026?

Common choices are porcelain and sintered stone, natural granite or marble, solid timber, stainless steel, laminate, and low-silica engineered stone (under 1% crystalline silica). High-silica engineered stone has been banned nationally for manufacture, supply and installation since 1 July 2024, so new benchtops use the alternatives above.

Is engineered stone still allowed?

Engineered stone containing 1% or more crystalline silica was banned for manufacture, supply, processing and installation across Australia from 1 July 2024 under the model WHS Regulations administered by Safe Work Australia. Low-silica products under 1% remain legal. Existing benchtops installed before the ban are grandfathered and do not need replacing.

How much does a kitchen renovation cost in Melbourne?

Most Melbourne kitchen renovations land between $25,000 and $60,000 fully fitted. A budget refresh (door fronts, benchtop, splashback, no layout change) typically starts around $12,000 to $30,000, while premium renovations with natural stone, custom joinery and a butler's pantry can exceed $80,000. Figures are indicative only - the renovator we match you with provides a written fixed-price quote.

What warranty will I get on a kitchen renovation?

Warranty terms vary by provider, product and contract. Cabinetry and installation workmanship warranties are commonly 5 years or more, while appliance and tapware warranties pass through from the manufacturer (typically 2 to 5 years). Ask for all warranty terms in writing before work starts.

How long does a kitchen renovation take in Melbourne?

Allow roughly 6 to 12 weeks from contract signing to handover for a mid-range full renovation. Cabinetry and stone fabrication take around 4 to 6 weeks as a lead-in, on-site work runs 2 to 4 weeks, and finishing adds 1 to 2 weeks. Lead times on cabinets, stone and appliances drive the front half of the project.

Melbourne suburbs we cover for Benchtop Installation

The Benchtop Installation service is available across all 15 Melbourne suburbs in our coverage area. Pick your suburb for the local notes, or submit the form for a free review.

See all locations ->

Get matched

Ready to start benchtop installation in Melbourne?

Submit the form. We match you with a stone fabricator and installer whose recent work matches your slab and edge brief, and arrange the template visit.